Jump Wire v1.0
Overview
The Jump Wires with the same tag can read the bottom inputs of each other, which can be used to transmit signals wirelessly. The transmission delay is 1 electric cycle (0.01 seconds).
There are green lines between the jump wires with the same tag, indicating that they are connected to each other.
Ports Definition
Top Output
| Function | Description |
|---|---|
Output | According to left and right input, the Jump Wire performs a bitwise OR operation between the bottom input of itself and the input of other Jump Wires, then output the result. |
Right Input
| Function | Description |
|---|---|
Whether Read Other Jump Wires | If this input is greater than 7 V, the Jump Wire will read the bottom input of other Jump Wire, whose tag is same and left input is greater than 7 V. |
Bottom Input
| Function | Description |
|---|---|
Bottom Input | / |
Left Input
| Function | Description |
|---|---|
Whether Allow Bottom Input | If this input is greater than 7 V, the Jump Wire will allow bottom input, and the bottom input can be read by other Jump Wires with the same tag. |
Back Input
| Function | Description |
|---|---|
Tag | Set the tag of the Jump Wire. There are green lines between the jump wires with the same tag, indicating that they are connected to each other. |
